Parameters For Interface Module Im151-1 Fo Standard - Siemens Simatic ET 200S Operating Instructions Manual

Interface modules
10.2 Parameters for interface modules
Analog-value format
Interference frequency
suppression
Reference junction slot
Reference junction input
Synchronize slave on DP cycle
Time Ti
(read in process values)
Time Ti
(output process values)
See also the "option handling" parameter.
1
The default setting of the parameter in the GSD file is "disable".
2
Only parameterizable in DPV1 operation.
3
The parameter is only available for configuration with the GSD file.
4
The default settings apply for the default start-up (if no other parameters have been assigned by the
5
DP master).
Only IM151-1 HIGH FEATURE and frp,
6
See also
Assigning parameters for option handling (Page 7-11)
10.2.3

Parameters for interface module IM151-1 FO STANDARD

Parameterize register
Table 10-4
Bus length
Operation at set <> actual
configuration
Option handling, general
Option handling: Slots 2 to 63
Analog-value format
Interference frequency
suppression
Reference junction slot
Reference junction input
See also the "option handling" parameter.
1
The parameter is only available for configurations with the GSD file.
2
The default settings apply for the default start-up (if no other parameters have been assigned by the
3
DP master).
10-4
IM151-1 STANDARD/
IM151-1 HIGH FEATURE
4
6
6
Parameters for interface module IM151-1 FO STANDARD
IM151-1 FO STANDARD
1
2
Value range
SIMATIC S7/
SIMATIC S5
50 Hz / 60 Hz
None /2 to 63
RTD on channel 0/
RTD on channel 1
disable/enable
6
Minimum/Maximum
Minimum/Maximum
STEP 7
V5.1 with SP 3
Value range
≤ 1 m / > 1 m
disable/enable
disable/enable
disable/enable
SIMATIC S7 /
SIMATIC S5
50 Hz / 60 Hz
None /2 to 63
RTD on channel 0/
RTD on channel 1
Default setting
5
S7 ET 200S
50 Hz ET 200S
None ET 200S
0 ET 200S
disable ET 200S
Standard value ET 200S
Standard value ET 200S
Default setting
3
≤ 1 m ET 200S
Disable ET 200S
disable ET 200S
disable Module
S7 ET 200S
50 Hz ET 200S
None ET 200S
0 ET 200S
Operating Instructions, 12/2005, A5E00515771-03
Applicability
Applicability
ET 200S