Configuration Options Of The Compact Modules - Siemens Simatic ET 200S Operating Instructions Manual

COMPACT modules

11.2 Configuration options of the COMPACT modules

11.2 Configuration options of the COMPACT modules
11.2
Which COMPACT module matches your application:
Table 11-1 Assignment of COMPACT modules and applications
COMPACT modules
IM151-1 COMPACT
11.3 Parameters and parameter descriptions for COMPACT modules
11.3
11.3.1 Parameters for IM151-1 COMPACT
Table 11-2
Operation at set <> actual
configuration
Identifier-related diagnostics
Module status
Channel-specific diagnostics
Analog-value format
Interference frequency
suppression
Reference junction slot
Reference junction input
11-2
Connecting the PROFIBUS DP via the RS485 interface
•
Operation as a DPV0 slave
•
Direct data exchange
•
Bus length of the ET 200S: not relevant
•
Integrated periphery:
•
32DI: Digital inputs
–
16DI/16DO: Digital inputs/outputs
–
Number of additional modules: max. 12
•
Module types: all except fail-safe modules
•
Parameters for IM151-1 COMPACT
IM151-1 COMPACT
1
Applications
Value range
disable/enable Disable
disable/enable enable
disable/enable enable
disable/enable enable
SIMATIC S7/ S7
SIMATIC S5
50 Hz / 60 Hz 50 Hz
None /2 to 13 None
RTD on channel 0/ 0
RTD on channel 1
Operating Instructions, 12/2005, A5E00515771-03
Transfer rates:
9.6; 19.2; 45.45; 93.75;
187.5; 500 kBaud,
1.5; 3; 6; 12 Mbit/s
Default setting Applicability
Slave station
Slave station
Slave station
Slave station
Slave station
Slave station
Slave station
Slave station
ET 200S