Interface Module Im151-3 Pn High Feature (6Es7151-3Ba20-0Ab0) - Siemens Simatic ET 200S Operating Instructions Manual

Interface modules

10.9 Interface module IM151-3 PN HIGH FEATURE (6ES7151-3BA20-0AB0)

10.9 Interface module IM151-3 PN HIGH FEATURE
10.9
(6ES7151-3BA20-0AB0)
10.9.1 Properties of the IM151-3 PN HIGH FEATURE interface module
Characteristics
The IM151-3 PN HIGH FEATURE interface module has the following characteristics:
• It connects the ET 200S with PROFINET IO
• It prepares the data for the electronic modules and motor starters that are fitted
• It supplies the backplane bus
• Transfer and backup of the device name on SIMATIC Micro Memory Card
• Firmware update using a SIMATIC Micro Memory Card
• The reference potential M of the rated supply voltage of the IM151-3 PN HIGH FEATURE
• Supported Ethernet services
• Interrupts
• Records for IO modules
• The maximum address scope amounts to 256 bytes I/O data.
• A maximum of 63 modules can be operated with the IM151-3 PN HIGH FEATURE.
• The maximum bus length at the backplane bus is 2 m.
• Grouping of modules within one byte (packing).
• Use of fail-safe modules
10-30
to the rail (protective conductor) is connected by means of an RC combination, thus
permitting an ungrounded configuration.
– ping
– arp
– Net diagnostics (SNMP) / MIB-2
– Diagnostic interrupts
– Process interrupts
– Insert/remove module interrupts
Operating Instructions, 12/2005, A5E00515771-03
ET 200S