8.2.3
Evaluating the Interrupts of the ET 200S
0
"Process interrupt lost" Diagnostics
The "Process interrupt lost" diagnostics is not available for modules at present.
Note
Process interrupts should not be used for technological purposes (e.g. cyclical generation of
process interrupts).
If more than approximately 90 process interrupts are generated per second, process
interrupts may be lost.
8.1.4.10 Interrupts
0
Process interrupt of analog input modules
Figure 2-1
ET 200S
Product Information, 03/2006, A5E00743001-01
New Information About the "ET 200S Distributed I/O System Operating Instructions"
Structure as of Byte x+4 and Byte x+5 for process interrupt (analog input)
0
8.2.3 Evaluating the Interrupts of the ET 200S
2-3