Siemens Simatic ET 200S Operating Instructions Manual page 410

New Information About the "ET 200S Distributed I/O System Manual"
0 4.20 2AO U High Feature Analog Electronic Module (6ES7135-4LB02-0AB0)
3-16
Cycle time per module
Resolution (including overrange)
Settling time
For resistive load
•
For capacitive load
•
For inductive load
•
Crosstalk between the outputs
Operational limit
(in the entire temperature range, with reference to
the output range)
Basic error limit (operational limit at 25 °C with
reference to output range)
Temperature error (with reference to the output
range)
Linearity error (with reference to the output range) ± 0.01 %
Repeatability (in steady state at 25 °C with
reference to output range)
Output range (rated value)
Load impedance (in the rated range of the output)
At voltage outputs capacitive load
•
Voltage output
•
Short-circuit protection
•
Short-circuit voltage
•
Destruction limit against voltages/currents applied
from outside
Voltage at the outputs to M
•
Connection of actuators
Voltage output
•
2-wire connection
4-wire connection
Analog Value Generation
0.5 ms
± 5 V / 15 bits + sign
± 10 V / 15 bits + sign
1 V to 5 V / 15 bits
0.3 ms
0.5 ms
0.5 ms
Interference Suppression, Error Limits
Min. -60 dB
± 0.1 %
± 0.05 %
± 0.003%/K
± 0.01 %
Actuator Selection Data
± 5 V
± 10 V
1 V to 5 V
Min. 1.0 kΩ
Max. 0.5 µF
Yes
Approx. 25 mA
Max. 15 V continuous; 75 V for max. 1 ms
ANA
(sampling ratio 1:20)
Possible, without compensation of the line
resistances
Possible
Product Information, 03/2006, A5E00743001-01
ET 200S