Siemens Simatic ET 200S Operating Instructions Manual page 109

1COUNT 24V/100kHz
1COUNT 5V/500kHz
1SSI
1STEP 5V/204kHz
2PULSE
1POS INC/Digital
1POS SSI/Digital
1POS INC/Analog
1POS SSI/Analog
1SI 3964/ASCII
1SI Modbus/USS
RESERVE
See also
Incorrect configuration states of ET 200S on PROFIBUS DP (Page 8-50)
Incorrect configuration states of the ET 200S on the PROFINET IO (Page 8-61)
ET 200S
Operating Instructions, 12/2005, A5E00515771-03
5.5 Plugging and removing electronic modules and COMPACT modules
Module Removing and
inserting
Yes The load voltage must be switched off by
means of an external switch/fuse!
Yes ---
Yes ---
Yes ---
Wiring and assembly
Conditions
5-29