Table 10-11 Available Simatic Micro Memory Cards - Siemens Simatic ET 200S Operating Instructions Manual

Caution
Possible data loss
If the maximum number of write/delete operations is exceeded, data loss is possible.
Applicable SIMATIC Micro Memory Cards
The following memory modules are available for use:

Table 10-11 Available SIMATIC Micro Memory Cards

SIMATIC Micro Memory Card 64k
SIMATIC Micro Memory Card 128k
SIMATIC Micro Memory Card 512k
SIMATIC Micro Memory Card 2M
SIMATIC Micro Memory Card 4M
SIMATIC Micro Memory Card 8M
For storage of the device name, a SIMATIC Micro Memory Card 64k sufficient. For a
firmware update the SIMATIC Micro Memory Cards with 2 MB or higher are required.
Inserting/replacing the card
The SIMATIC Micro Memory Card designed so that it can also be removed and inserted
under power. The beveled corner of the SIMATIC Micro Memory Card prevents it from being
inserted the wrong way around (reverse polarity protection).
The module slot on the IM 151-3 PN is located behind the front door. The front door has a
protruding edge for opening.
The socket of the module slot has an ejector enabling you to remove the card. To eject the
card, push in the ejector with a suitable object (such as a small screwdriver or ball-point
pen).
ET 200S
Operating Instructions, 12/2005, A5E00515771-03
10.8 Interface module IM151-3 PN (6ES7151-3AA20-0AB0)
Type Order numbers
6ES7953-8LF11-0AA0
6ES7953-8LG11-0AA0
6ES7953-8LJ11-0AA0
6ES7953-8LL11-0AA0
6ES7953-8LM11-0AA0
6ES7953-8LP11-0AA0
Interface modules
10-27