Table 8-11 Digital Electronic Module Error Types - Siemens Simatic ET 200S Operating Instructions Manual

Digital electronic module error types
The table below shows the error types on digital electronic modules.
Table 8-11 Digital electronic module error types
Digital electronic modules
2DI 24 VDC HF
4DI 24 VDC HF
4DI 24 VUC..48 VUC HF
2DO 24 VDC/0.5 A HF
2DO 24 VDC/2 A HF
ET 200S
Operating Instructions, 12/2005, A5E00515771-03
8.1 Alarm, error and system messages on PROFIBUS DP
Error class
1 00001: Short circuit
D
1 00001: Short circuit
D
(in conjunction with
IM151-1 BASIC / IM151-1
COMPACT / IM151-1
STANDARD, 6ES7151-
1AA02-0AB0 and higher,
IM151-1 FO STANDARD,
6ES7151-1AB01-0AB0
and higher) or IM151-1
HIGH FEATURE
26 11010: External error
D
(in conjunction with
IM151-1 STANDARD, to
6ES7151-1AA01-0AB0 or
IM151-1 FO
STANDARD, to 6ES7151-
1AB00-0AB0)
26 11010: External error
D
1 00001: Short circuit
D
6 00110: Wire break
D
Alarm, error and system messages
Meaning
Short circuit of the
sensor supply. The
diagnostic message is
issued on Channel 0
and applies to the
whole module.
Short circuit of the
sensor supply. The
diagnostic message is
issued on Channel 0
and applies to the
whole module.
Line to the actuator
interrupted.
Power supply voltage
not present or too low.
Fuse triggered.
Short circuit of actuator
supply after M.
Line to the actuator
interrupted.
Remedy
Correct the process
wiring (sensor wiring).
Correct the process
wiring (sensor wiring).
Correct the process
wiring.
Correct the process
wiring. Check the supply
voltage.
Replace the fuse.
Correct the process
wiring.
8-35