Siemens Simatic ET 200S Operating Instructions Manual page 6

Preface
Special note
In addition to this manual you also need the manual of your DP master or PROFINET IO
controller.
Note
You will find a detailed listing of the contents of the ET 200S manuals in the preface to these
operating instructions under "Position in the information landscape". We recommend that
you begin by reading this section so as to find out which parts of which manuals are most
relevant to you in helping you to do what you want to do.
Recycling and disposal
Thanks to the fact that it is low in contaminants, the ET 200S is recyclable. For
environmentally compliant recycling and disposal of your electronic waste, please contact a
company certified for the disposal of electronic waste.
Contacts
See product information
You will find information on this in the product information on the intranet at:
http://www.siemens.com/automation/service
Search for the entry with the number 19293011.
Training
See product information
SIMATIC Technical Support
See product information
Service & Support on the Internet
See product information
See also
Order numbers for ET 200S accessories (Page A-5)
Order numbers for ET 200S network components (Page A-6)
Order numbers for ET 200S spare parts (Page A-7)
Order numbers for connecting cables for 4 IQ-SENSE electronic module (Page A-7)
Standards and approvals (Page 9-1)
vi
Technical Support, Contacts and Training
Technical Support, Contacts and Training
Technical Support, Contacts and Training
Technical Support, Contacts and Training
.
.
.
.
Operating Instructions, 12/2005, A5E00515771-03
ET 200S