Led Displays On The 2Pulse - Siemens Simatic ET 200S Operating Instructions Manual

8.1.1.10

LED displays on the 2PULSE

2PULSE
LED displays on the 2PULSE:
①
②
③
Status and error displays by means of LEDs on 2PULSE
The table below shows the status and error displays on the 2PULSE.
SF
on
ET 200S
Operating Instructions, 12/2005, A5E00515771-03
1
2
3
Group error (red)
Status display for digital input (green)
Status display for the digital output (green)
Event (LEDs)
1 5 4 8
No parameter assignment. There
is a diagnostic message.
on Input on channel 0 activated.
on Input on channel 1 activated.
on Output on channel 0 activated.
on Output on channel 1 activated.
8.1 Alarm, error and system messages on PROFIBUS DP
Cause
Check the parameter assignment.
Evaluate the diagnostics.
Alarm, error and system messages
Action
8-13