Interface Module Im151-1 High Feature (6Es7151-1Ba01-0Ab0) - Siemens Simatic ET 200S Operating Instructions Manual

Interface modules

10.7 Interface module IM151-1 HIGH FEATURE (6ES7151-1BA01-0AB0)

10.7 Interface module IM151-1 HIGH FEATURE (6ES7151-1BA01-0AB0)
10.7
Properties
The IM151-1 HIGH FEATURE interface module has the following features:
• It connects the ET 200S with PROFIBUS DP via the RS485 interface.
• There is no restriction on the maximum parameter length for SIMATIC S7, otherwise it
• The maximum address space is 244 bytes for inputs and 244 bytes for outputs.
• Operation as a DPV0 or DPV1 slave
• A maximum of 63 modules can be operated with the IM151-1 HIGH FEATURE.
• The maximum bus length on the backplane bus is 2 m.
• Supports option handling and status byte for power modules.
• synchronizable with the DP cycle (cycle synchronization).
• Firmware update via PROFIBUS DP with HW Config possible.
• Security-oriented I-slave-slave-communication via PROFIBUS DP. You can find the
• Identification Data
• Operation as DPV1 slave on the Y switching
• Use of fail-safe modules
Restrictions when operating the modules with the IM-151 HIGH FEATURE
The following modules cannot be used with the IM-151 HIGH FEATURE:
1COUNT 24V/100kHz
1COUNT 5V/500kHz
1SSI
1STEP 5V/204kHz
1SI serial interface module
Modbus/USS serial interface module
2AI U; HIGH FEATURE
2AI I 2/4DMU; HIGH FEATURE
2AO U; HIGH FEATURE
10-18
amounts to 244 bytes.
description of this function in the
manual.
Module
S7 Distributed Safety Configuration and Programming
Up to order number
6ES7138-4DA02-0AB0
6ES7138-4DE00-0AB0
6ES7138-4DB00-0AB0
6ES7138-4DC00-0AB0
6ES7138-4DF00-0AB0
6ES7138-4DF10-0AB0
6ES7134-4LB00-0AB0
6ES7134-4MB00-0AB0
6ES7135-4LB00-0AB0
Operating Instructions, 12/2005, A5E00515771-03
Up to product version
1
1
3
3
1
1
1
1
1
ET 200S