Siemens Simatic ET 200S Operating Instructions Manual page 251

Transferring the update files to a SIMATIC Micro Memory Card
1. Use the Windows Explorer to create a new directory.
2. Download the required update file from the Internet into this directory.
3. Unpack this update file into this directory. This directory contains three files with the
4. Insert a SIMATIC Micro Memory Card (≥ 2 MB) into the programming device or writing
5. Delete the SIMATIC Micro Memory Card in the SIMATIC Manager by using the "File > S7
6. In the SIMATIC Manager, select the "PLC > Update operating system" menu command.
7. Select the directory containing the UPD files in the displayed dialog box.
8. Double-click one of the UPD files. The data are written to the SIMATIC Micro Memory
The update files are now contained on the SIMATIC Micro Memory Card.
Carrying out the firmware update
1. Switch off the power to the IM151-3 PN and insert the SIMATIC Micro Memory Card with
2. Switch on the power supply for the IM151-3 PN interface module.
3. Switch off the power to the IM151-3 PN and insert the SIMATIC Micro Memory Card with
4. Insert the SIMATIC Micro Memory Card with the device names and switch on the power
The IM 151-3 PN powers up with the new firmware and is now ready for operation.
ET 200S
Operating Instructions, 12/2005, A5E00515771-03
extension UPD.
device.
Memory Card > Delete" menu command.
Card.
the firmware update into the slot.
The IM151-3 PN recognizes the SIMATIC Micro Memory Card with the firmware update
automatically and starts the module update. The SF and BF LEDs are lit, and the ON
LED is dark while the system is updating.
When the update has been completed, the BF LED flashes at 0.5 Hz.
firmware update.
supply again.
10.8 Interface module IM151-3 PN (6ES7151-3AA20-0AB0)
Interface modules
10-29