Siemens Simatic ET 200S Operating Instructions Manual page 53

Usage of COMPACT modules on terminal modules
Depending on the selected terminal module, various signals are available on the terminals.
You will find further information relating to this topic in the
the description of the relevant COMPACT module.
The terminal module TM-C must always be connected at the start of an ET 200S
configuration. Additional terminal modules TM-E or TM-P are to be connected to the right of
terminal module TM-C.
The following table describes which combinations of terminal and COMPACT modules can
be used.
Table 3-4
COMPACT modules
screw-type terminal
Order number 6ES7193
Spring terminal
Order number 6ES7193
32DI
16DI/16DO
ET 200S
Operating Instructions, 12/2005, A5E00515771-03
Assignment of terminal modules TM-C and COMPACT modules
Assignment of terminal modules TM-C and COMPACT modules
Application planning
3.1 Switching on the ET 200S
COMPACT-Module
120S
...4DL10-0AA0
120C
...4DL00-0AA0
●
●
chapter under
3-7