Siemens Simatic ET 200S Operating Instructions Manual page 399

2AI U High Feature Technical Specifications (6ES7134-4LB02-0AB0)
Dimensions W × H × D (mm)
(the total dimensions depend on the selected
terminal module)
Weight
Supports isochronous operation
Supports I&M functions
Number of inputs
Cable length
•
Parameter length
Analog value representation
Is supported if no interference frequency suppression or smoothing is configured.
*
Rated load voltage L+ (from the power module)
•
•
Galvanic isolation
•
•
•
•
Permitted potential difference
•
Insulation tested
Current consumption
•
Power dissipation of the module
Diagnostics functions
•
•
•
Process interrupts are only sent if the process interrupt mechanism is not overloaded.
*
ET 200S
Product Information, 03/2006, A5E00743001-01
New Information About the "ET 200S Distributed I/O System Manual"
0 4.7 2AI U High Feature Analog Electronic Module (6ES7134-4LB02-0AB0)
Shielded
Reverse battery protection
Supply of the measuring transducers
Between the channels and backplane bus
Between the modules and load voltage L+
Between the channels and PE
Between the channels
Between the channels
With load voltage L+
Group error
Diagnostics functions readable
Process interrupts
*
Dimensions and Weights
15 x 81 x 52
Approx. 45 g
Module-Specific Data
Yes
*
Yes
2
Max. 200 m
12 bytes
S5 and S7 format
Voltages, Currents, Potentials
24 VDC
Yes
No
Yes
Yes
Yes
No
140 VDC / 100 VAC
500 VDC
55 mA max.
Typically 0.85 W
Status, Alarms, Diagnostics
Red "SF" LED
Yes
Configurable, violation of upper and lower limits
3-5