Table of Contents
Advertisement
Decimation Filter
Table 26-18. DECFILTER_IB Register Field Descriptions (continued)
Field
8–13
Reserved, should be cleared.
14
Decimation Filter Prefill/Filter control bit
PREFILL
The PREFILL bit selects the Decimation Filter operation mode. For more details, see
Section 26.5.7, Filter prefill control
1 Decimation Filter prefill sample
0 Decimation Filter normal sample
15
Decimation Filter Flush control bit
FLUSH
Assertion of the FLUSH bit initializes the Decimation Filter to a initial state, as defined in
Section 26.5.9, Flush command
the data is read and the flush is executed.
1 Flush request
0 No flush request
16–31
Input Buffer Data
INPBUF[15:0]
The INPBUF[15:0] bit field carries the sample data to be filtered. This data buffer can be written
from the PSI slave-bus interface or by the device slave-bus interface. See
buffer
26.4.2.6
Decimation Filter Interface Output Buffer Register (DECFILTER_OB)
Address: DECFILTER_BASE + 0x014
0
1
R
0
0
W
Reset
0
0
16
17
R
W
Reset
0
0
Figure 26-7. Decimation Filter Interface Output Buffer Register (DECFILTER_OB)
Field
0–11
Reserved, should be cleared.
12–15
Decimation filter output tag bits. The OUTTAG[3:0] bit field is defined as a selector signal and it
OUTTAG[3:0]
is used to identify different destinations for the OUTBUF[15:0] data.
When an eQADC is the PSI block master, it holds the same number used to address the
destination RFIFO.
15–31
Output Buffer Data. The OUTPBUF[15:0] bit field is the result data in the decimation filter Output
OUTBUF[15:0]
Buffer. It represents a fixed point signed number in two's complement format and is updated only
when a decimated result is ready to be transmitted, meaning it contains the last decimated result
from the filter.
1194
description". This bit is self negated and it is cleared only when
description, for more details.
2
3
4
5
6
0
0
0
0
0
0
0
0
0
0
18
19
20
21
22
0
0
0
0
0
Table 26-19. DECFILTER_OB Register Field Descriptions
MPC5644A Microcontroller Reference Manual, Rev. 6
Description
description.
7
8
9
10
0
0
0
0
0
0
0
0
23
24
25
26
OUTBUF[15:0]
0
0
0
0
Description
Section 26.5.3, Input
Access: User read only
11
12
13
14
15
0
OUTTAG[3:0]
0
0
0
0
0
27
28
29
30
31
0
0
0
0
0
Freescale Semiconductor
Advertisement
Table of Contents
