Introduction - NXP Semiconductors MPC5644A Reference Manual

Parameter
NUM_EVTO (E)
NUM_JCOMP (J)
DC
Part Identification Number
(npc_did_pn_plug[9:0])
Part Revision Number
(npc_did_rev_plug[3:0])
NPC JCOMP Plug
(npc_jcomp_plug)
Part Identification Number
(nex_did_pn_plug[9:0])
Part Revision Number
(nex_did_rev_plug[3:0])
37.2

Introduction

Figure 37-1 is a block diagram of the Nexus Port Controller (NPC) block.
Freescale Semiconductor
Table 37-2. Parameter values (continued)
Number of sources that output an EVTO
Number of JCOMP bits used. Depends on the number
of non-Nexus blocks sharing the TAP
Design Code for the design center responsible for the
design of the device (TECD)
Part number of the device
Revision number of the device
JCOMP value required to grant Nexus control of the
JTAG port
NSEDI parameters
Part number of the eTPU
Revision number of the eTPU
MPC5644A Microcontroller Reference Manual, Rev. 6
Description
Nexus Port Controller (NPC)
Value
2
1
0x2B
0x202
0x1
0b1
0x125
0x0
1673