Creating Signal Definitions (Sigdef) - Siemens TXP-CLC Manual

Creating Signal Definitions (SIGDEF)

Every connection between diagrams should have a signal name. A signal name consists
of 4 characters: two letters and two numbers. A signal name is created when we make a
SIGDEF (signal definition). The following explains how to create a SIGDEF of a signal:
1.Highlight the port you wish to make the connection
from with the left mouse button, as shown in step 1.
(Handle bar points will appear)
2.While holding down the middle mouse
button select "create connection" from the
menu option list. Then release the center
mouse button. As shown in step 2.
4
Copying of this document, and giving it to others and use or communication of the contents, are forbidden without express authority. Offenders are liable to the payment of
damages. All rights are reserved in the event of the grant of a patent or the registration of a utility model or design.
2
Training Center
TXP CLC Course
1