Other Settings (Printer Settings)
Printing Area
Substitute Tray
Banner Sheet
Banner Sheet Tray
In Other Settings, several printer-related settings can be set.
Set whether or not to enlarge the printing area. The default is
Normal.
Set whether or not to switch to paper in a different tray when the
tray that was selected in Auto Tray Switching runs out of paper.
To substitute other paper, the size of the paper must be specified.
•
Display Message - Displays the message to add more paper
without substituting other paper.
•
Use Larger Size - Substitutes with paper of the next size of
paper larger than the currently selected size. The image will be
printed at 100% magnification.
•
Use Nearest Size - Substitutes with paper nearest to the
currently selected size, and prints on that paper. The image
will be automatically reduced if it is necessary.
The default is Display Message.
NOTE:If the paper size is specified by the client, the client setting
is given priority.
Set whether or not to output copies with a banner sheet attached.
•
Start Sheet - Banner sheet is printed before the job.
•
End Sheet - Banner sheet is printed after the print job.
•
Start Sheet + End Sheet - Banner sheets are printed before
and after the print job.
The default is Off.
NOTE:Banner sheets are not output if stapling is set. Banner
sheets are added to meters when they are output.
Select the tray to be used for the banner sheets. Trays 1 - 5
(bypass tray) can be selected. The default is Tray 1.
U
G
( M
S E R
U I D E
A C H I N E
A
)
D M I N I S T R A T O R
4 – 4 3