Advanced Fax Features - Xerox WorkCentre M15 User Manual

Advanced Fax Features

There are a number of advanced Fax features available on the WorkCentre M15i. The table
below identifies the advanced features available, the options for each feature and how to
select the feature.
Feature Description
FEATURE
Delay Send Load the originals and ensure the LCD displays FAX. If not, press the [Copy/Fax/Scan] key
Ø
until 'FAX MODE' displays and press [Enter].
Use to send a
l
fax at a
Program the features required for the job.
Ø
specified time.
Press [Menu/Exit] and press
Ø
Enter the number of the remote machine using the Numeric Keypad or the Speed Dial
Ø
function.
Press [Enter] to confirm the number.
Ø
To send the fax to more than one location use the
Ø
YES] and press [Enter]. Enter the next fax number and press [Enter]. Continue entering fax
numbers until all the destinations have been entered.
To send to a single location or when the last destination has been entered select [2: NO]
Ø
and press [Enter].
The display requests a name for the Delay Send.
If a name is required, enter a name using the Numeric Keypad and press [Enter].
Ø
The display shows the current time and requests a start time for the fax.
Enter the time using the Numeric Keypad.
Ø
If available, select AM or PM for 12-hour format using the
Ø
confirm the start time.
The originals are scanned into memory and stored ready for transmission at the specified
time. The display shows the memory % available and the number of pages scanned.
Page 6-8
TO SELECT....
or until 'DELAY SEND' displays, then press [Enter].
or
Xerox WorkCentre M15/M15i User Guide
navigation keys to select [1:
or keys. Press [Enter] to