Table of Contents
Advertisement
2.2.15 INSTALLING OR REPLACING A HOT-SWAP POWER SUPPLY
Do not proceed before reading and understanding the "Safety Precautions" section of this chapter and "Read Me First".
1. Slide the hot-swap power supply into the chassis until it snaps into position.
2. Connect the power cord.
To remove
1.
Disconnect the power cord
2.
Push the latch and pull hot-swap power supply out.
2.2.16 INSTALLING OR REPLACING A SYSTEM FAN
Do not proceed before reading and understanding the "Safety Precautions" section of this chapter and "Read Me First".
To remove a system fan, do the following:
1. Remove the server cover. (See "Removing and reinstalling the server cover")
2. Lift the system fan module out of the server.
To reinstall, reverse the steps above.
Removing the system fan
32
Hide quick links:
Advertisement
Table of Contents
