4-Way Server Blade: Installing/Removing Processors - Fujitsu PRIMERGY BX600 User Manual

Update revision 08.2004

4-way server blade: Installing/removing processors

The 4-way server blades offers four processor sockets. The base configuration
contains two processors. Processors 3 and 4 can be added later. A 4-way server
blade can accommodate Intel
or 3.0 GHz.
The 2.2 GHz CPU offers 2 MB third-level cache, while the 2.7 GHz and 3.0 GHz
CPUs each offer 4 MB third-level cache.
It is not possible to use CPUs with different clock rates or cache capacity
!
in the same 4-way server blade.
Make sure you observe the correct sequence when installing CPUs in the
4-way server blade.
FC I/O Board 1
CPU 4 CPU 1
2 processors
(base configuration)
The processors and heat sinks are installed and removed in the same way as
in the 2-way server blade, see
Before installing CPU 3, you must remove the control panel board from
i
its fastening on the front of the server blade chassis (see
02-BX600-185).
02 BX600 178
– –
® ®
XEON MP processors with 2.2 GHz, 2.7 GHz
Batt.
FC I/O Board 1
CPU 4 CPU 1
CPU 2
CP
3 processors
page 02-BX600-84.
March 2006
Batt.
FC I/O Board 1
CPU 4 CPU 1
CPU 3 CPU 2
CP
4 processors
page
U41057-J21-Z146-1-76
Updates
Batt.
CP