Fujitsu PRIMERGY BX600 User Manual page 59

Installation and initial operation
Ê Enter 2 if the preset duplex mode value needs to be altered or 0.
i
The transfer rate of 10 Mbit/sec and the duplex mode of the
management blade must comply with the client LAN controller!
Automatic synchronization is not supported by the management
blade LAN controller.
Ê Enter 0 in this menu and in the preceding menus to leave the management
blade console menu.
Ê Close the HyperTerminal session.
Ê Unplug the power cable from the blade server and plug it in again to reboot
the management blade.
The management blade can now be accessed remotely via LAN.
U41057-J21-Z146-1-76
March 2006
Settings
02 BX600 59
– –