Fujitsu PRIMERGY BX600 User Manual page 196

Update revision 11.2004
Port assignment of the Gigabit Ethernet pass-thru blades
On the back of the PRIMERGY BX600 Blade Server are four slots for Gigabit
Ethernet pass-thru blades.
2
4
Figure 1: Slots for installing pass-thru blades
Slots 1 and 2 are connected to the onboard LAN controllers of the server blades.
i
Slots 1 and 2 can also accommodate switch blades for connecting the
onboard LAN contollers of the server blades to the LAN, see
02-BX600-43.
Slots 3 and 4 offer connections to the optional gigabit Ethernet I/O modules of
the server blades.
i
If the server blades are to offer Fibre Channel functionality, an FC pass-
thru blade must be installed in slot 3 and/or 4, see
It is not possible to operate both gigabit Ethernet I/O modules and Fibre
Channel I/O modules in a PRIMERGY BX600 Blade Server.
The following configuration examples show the assignment of the Ethernet LAN
ports of the pass-thru blades to the server blades.
02 BX600 196
– –
March 2006
Updates
1
3
page
page 02-BX600-46.
U41057-J21-Z146-1-76