4-Way Server Blade: Fc Daughter Cards - Fujitsu PRIMERGY BX600 User Manual

Updates

4-way server blade: FC daughter cards

The 4-way server blade offers two PCI X 64-bit slots for installing FC daughter
cards. This allows up to two or four independent serial 2-GB Fibre Channel
ports to be provided in a 4-way server blade. The slots for the first FC daughter
card are located on the system board of the 4-way server blade.
Position of FC daughter card 1 on the system board
The slots for the second FC daughter card are located on the extension board,
which is installed as a second level above the slots for the first FC daughter
card.
Position of FC daughter card 2 on the extension board
Installing an FC daughter card
FC daughter cards are installed in the 4-way server blade in the same way as in
the 2-way server blade, see
To install FC daughter card 1 on the system board of the 4-way server
i
blade, you must first remove the extension board and reinstall it after-
wards (see page
U41057-J21-Z146-1-76
page 02-BX600-98.
02-BX600-182).
March 2006
Update revision 08.2004
02 BX600
–
181
–