Fujitsu PRIMERGY BX600 User Manual page 40

Server Blade Setup Using ServerStart
Ê Connect the data cables of the CD-ROM and floppy disk drives to the USB
ports on the breakout cable.
Ê Switch on the server system and the desired server blade.
Ê If the CD-ROM and floppy disk drives are not powered by the USB hub
provided by the breakout cable, connect their mains adaptors to grounded
mains outlets.
Connecting the monitor, keyboard and mouse to the BX600 housing
1
Ê Connect the KVM cable to the KVM connector (1) on the rear of the server.
Ê Connect the mouse (2, green) and keyboard cables (3, purple) to the PS/2
connectors of the KVM cable.
Ê Connect the data cable of the monitor to the VGA connector (4) of the KVM
cable and plug the monitor power cable into a grounded mains outlet.
02 BX600 40
– –
2 3
March 2006
Installation and initial operation
U41057-J21-Z146-1-76
1
4