Fujitsu PRIMERGY BX600 User Manual page 68

Troubleshooting
No mouse pointer displayed on the screen
Mouse driver not installed
Ê Check that the mouse driver is installed correctly and activated. For infor-
mation on the mouse driver, see the documentation for mouse, operating
system and application program.
Floppy disk cannot be read or written
Ê Check that the write protection of the floppy disk is activated.
Ê Check the entry for the floppy disk drive in the BIOS Setup (see BIOS
manual).
Ê Check in the BIOS Setup that the floppy disk drive controller and the write
permission are switched on (see BIOS manual).
Ê Make sure that the cables of the floppy disk drive are connected correctly.
Time and date are not correct
Ê Set the time and/or date in the operating system or in the BIOS Setup.
If the time and date are repeatedly wrong after the server has
i
been switched off and on again, the lithium battery must be
replaced (see
System will not boot after installing a new hard disk drive
SCSI configuration incorrect (onboard SCSI HostRAID controller Adaptec
7902W)
Ê Check in the SCSI configuration menu the settings for the hard disk
drives (SCSI Device Configuration) and the additional settings (Advanced
Configuration Options).
02 BX600 68
– –
page 02-BX600-88).
March 2006
Diagnostics
U41057-J21-Z146-1-76