Fujitsu PRIMERGY BX600 User Manual page 32

Initial operation and operating
4 KVM/MP fail indicator (green LED)
Dark:
Lights green:
Blinks green
5 Fibre Channel I/O status (green LED)
Dark:
Green:
6 NIC indicator (green LED)
Dark:
Lights green:
Blinks green:
7 USB/VGA connector
Adapter connector for two USB ports for external CD/FD drives and one VGA
port.
A special cable is required! (see
!
8 HDD access (green LED)
Unlit:
Lights green:
9 HDD indicator (amber LED)
Unlit:
Lights amber:
02 BX600 32
– –
KVM is not selected from this server blade.
KVM is selected from this server blade.
KVM is selected from this server blade and this blade is
disabled due to power budget.
If there is not enough power available for the whole system due
to a PSU failure, the management blade will shut down as
many server blades as required to compensate for the reduced
power, starting with the server blade in slot 10 and continuing
in reverse slot numbering order.
System is switched OFF or loss of signal synchronization
System is switched ON and online
System or server blade is switched OFF and LAN interface not
working.
LAN is connected.
LAN is active.
Hard disk drive is inactive.
Hard disk drive is active.
System or server blade is powered OFF and hard disk drive
inactive.
The server blade is switched ON and the hard disk drive is
faulty.
March 2006
Installation and initial operation
page 02-BX600-26)
U41057-J21-Z146-1-76