Fujitsu PRIMERGY BX600 User Manual page 164

Update revision 08.2004
Configuration with 4-way server blades
– Slots 3 and 4 must be filled first.
– Then slots 5 to 10 are filled in pairs, followed by slots 1 and 2, in numerical
order.
1 2
5
Installation sequence with 4-way server blades
Configuration with a mix of 2-way and 4-way server blades
– The 4-way server blades must be installed first, then the 2-way server blades.
– The first 4-way server blade is installed in slots 3 and 4.
1 2
6
Installation sequence with three 2-way and three 4-way server blades
2-way server blades with a SCSI controller must be installed in slots 5
i
and 6 only. If only one 2-way server blade with a SCSI controller is being
installed, it should go in slot 5, and slot 6 should be fitted with a dummy
blade.
02 BX600 164
– –
3 4 5
1
3 4 5
1
March 2006
6 7
2 3
6 7
2
3
Updates
8 9 10
4
8 9 10
4 5
U41057-J21-Z146-1-76