4-Way Server Blade: Software Support - Fujitsu PRIMERGY BX600 User Manual

Update revision 08.2004
Product
S26361-F2762-E524 1 GB RAM, PC2100 registered DDR RAM with chipkill support,
S26361-F2762-E525 2 GB RAM, PC2100 registered DDR RAM with chipkill support,
S26361-F2762-E526 4 GB RAM, PC2100 registered DDR RAM with chipkill support,
Product
S26361-F2609-L620 USB cable for CD-ROM drive
S26361-F2609-L420 Traveler CD-ROM drive

4-way server blade: Software support

The PRIMERGY BX600 4-way server blade supports the following software and
firmware versions (and later):
ServerView
RemoteView
ServerStart
ServerBooks
ServerSupport
02 BX600 168
– –
RAM
server blade
– A
modules (8 slots, to be fitted in pairs).
– These memory banks can be fitted with 1GB, 2GB and 4GB
DDR SDRAM modules.
– This allows a maximum memory configuration of 16GB.
i
ECC with memory scrubbing, chipkill and a hot-spare
memory bank are standard with PRIMERGY BX600 4-
way server blades.
consisting of 2 modules, occupies one memory bank, max. 4 per
server blade
consisting of 2 modules, occupies one memory bank, max. 4 per
server blade
consisting of 2 modules, occupies one memory bank, max. 4 per
server blade
Attachable drives / external devices
The following devices can be attached to a
breakout cable.
Version 3.0
Version 3.0
Version 5.408
Version 5.408
Version 4.27 / 5.208
March 2006
offers four memory banks for memory
Updates
server blade
using a
U41057-J21-Z146-1-76