Update revision 08.2004
Ê Undo the two Torx screws which fasten the control panel board to the server
blade chassis.
Ê Swivel the control panel board with the connection cable out of its mounting
position in the direction of the arrow.
If you want to remove CPU 2, or if you must disconnect the cable of the
i
control panel board from the system board of the 4-way server blade, you
can now remover the heat sink for CPU 2.
Tip: The heat sink of CPU 2 is easier to remove if you first remove the
heat sink of CPU 1.
02
BX600
186
–
–
March 2006
Updates
U41057-J21-Z146-1-76