Fujitsu PRIMERGY BX600 User Manual page 191

Updates
Ê Insert the BIOS flash diskette in a USB diskette drive and connect the
diskette drive to the USB port of the 4-way server blade using the USB
breakout cable (see
Ê Press the KVM button on the control panel of the 4-way server blade (see
page 02-BX600-170) to switch the keyboard, mouse and monitor of the KVM
blade to the server blade.
Ê Switch on the 4-way server blade (see
After a short beep, the BIOS is uploaded. The status of the flash process is
displayed on the KVM console. After the flash is completed, instructions are
displayed for the following procedure:
Ê Switch off the 4-way server blade.
Ê Remove the 4-way server blade and open it.
Ê Set switch 8 of the DIP switches on the system board back to OFF.
Ê Close the 4-way server blade and reinstall it.
Now you can reactivate the 4-way server blade.
U41057-J21-Z146-1-76
page 02-BX600-170).
page
March 2006
Update revision 08.2004
02-BX600-37).
02 BX600 191
– –