Fujitsu PRIMERGY BX600 User Manual page 205

Updates
Product
S26361-F3022-E3
S26361-F3011-E1
S26361-F3090-E256 2-channel RAID controller Ultra320, LSI 320-2x, 256MB
S26361-F2399-E1
Product
S26361-F3023-E1
S26361-F3111-E1
U41057-J21-Z146-1-76
PCI options
– A PCI slot can be provided instead of the bottom hard disk
bay.
– A PCI slot is a short slot with full height. It offers PCI-X
64bit/100MHz.
i
This solution only allows one internal SCSI hard disk
module per server blade.
Carrier module for PCI slot, max. 1 per server blade
Gigabit-Ethernet controller Dual 1000TX, Intel Pro/1000MT Dual
Server Adapter, Adapter Teaming Support, PCI-X (PCI64/66),
min. 163 mm, socket for RJ45 plug, max. 1 per server blade
SDRAM ECC cache, without cable, max. 1 per server blade in
slots 5 and 6.
SCSI Ultra160 controller, Adaptec SCSI Card 29160, for
accessible drives (PRIMERGY SX10), max. 1 per server blade
in slots 5 and 6.
I/O module
– Each server blade offers one optional slot for an I/O module
(Fibre Channel or Ethernet LAN).
i
To be able to use the additional I/O functionality, at least
one FC pass-thru blade or Gigabit Ethernet pass-thru
blade must be installed in the system.
2Gbit/s FC I/O module with ISP2312 dual channel, 2Gbit/s PCI-
X 133MHz, 3.3V signal voltage; max. 1x per server blade
1Gbit/s Ethernet I/O module with 2 channels at 1Gbit/s PCI-X
133MHz, 3.3V signal voltage; max. 1x per server blade
March 2006
Update revision 11.2004
02 BX600
–
205
–