The Server Blade
Recovering the Server Blade BIOS
This section describes the procedure for recovering the server blade BIOS.
Use this procedure only in case of failure.
!
Requirements
– The blade server is connected to the power line.
– The server blade is switched off.
Creating a BIOS Flash Diskette
Ê Unzip the ZIP file s71xxxx.zip to your disk (xxxx = BIOS version).
You can download the files required for creating the BIOS flash diskette
i
from the software pool
http://service.abg.fsc.net/support/softwareAssist.asp.
Ê Insert a diskette into your floppy drive.
Ê Run the program crisdisk to create a BIOS flash diskette.
Recovering the Server-Blade BIOS
Ê Connect the mouse, keyboard and monitor to the KVM blade on the rear of
the server (see
Ê Remove the server blade from the blade server chassis (see
02-BX600-73) and open the server blade (see
02
BX600
102
–
–
page
02-BX600-40).
March 2006
Removal and Installation Routines
page
02-BX600-76).
U41057-J21-Z146-1-76
page