Fujitsu PRIMERGY BX600 User Manual page 189

Updates Update revision 08.2004
2
1
2
Ê Slide the fastening bracket of the connector on the control panel board in the
direction of the arrow (1), pressing on the sides (2).
Ê Pull the cable with the heat protection sleeve off the control board panel.
Installing the control panel board
To install the control panel board, follow the above steps in reverse order.
4-way server blade: Recovering the server blade BIOS
This section describes how to recover the BIOS of the 4-way server blade in the
event of an error.
This procedure must only be used in the event of an error.
!
Requirements
– The blade server is connected to the mains.
– The 4-way server blade is switched off.
March 2006 02 BX600 189
U41057-J21-Z146-1-76 – –