Fujitsu PRIMERGY BX600 User Manual page 17

General information
Product
S26361-F2764-E136 36 GB, 10000 rpm, <5.5 ms, Ultra 320 SCSI (320 MB/s), hot-
S26361-F2764-E173 73 GB, 10000 rpm, <5.5 ms, Ultra 320 SCSI (320 MB/s), hot-
S26361-F2764-E114 146 GB, 10000 rpm, <5.5 ms, Ultra 320 SCSI (320 MB/s), hot-
S26361-F2764-E518 18 GB, 15000 rpm, <4 ms, Ultra 320 SCSI (320 MB/s), hot-
S26361-F2764-E536 36 GB, 15000 rpm, <4 ms, Ultra 320 SCSI (320 MB/s), hot-
S26361-F2764-E573 73 GB, 15000 rpm, <4 ms, Ultra 320 SCSI (320 MB/s), hot-
Product
S26361-F3023-E1
Product
U41057-J21-Z146-1-76
Hard disk drives
– The 80-pin SCA hard disks are plugged into a 1-channel
backplane which is directly connected.
– Hot replace is possible with onboard Adaptec 7902 using
the HostRAID functionality.
i
Only one SCSI hard disk can be chosen if the
lower SCSI hard disk bay is used for the PCI slot
module.
plug/hot-replace tray, max. 2 per server blade
plug/hot-replace tray, max. 2 per server blade
plug/hot-replace tray, max. 2 per server blade
plug/hot-replace tray, max. 2 per server blade
plug/hot-replace tray, max. 2 per server blade
plug/hot-replace tray, max. 2 per server blade
I/O module
– Each server blade has one optional slot for an on-board
Fibre Channel I/O module.
i
This functionality requires a Fibre Channel pass-
thru blade in the system unit.
2Gbit/s FC I/O module with ISP2312 Dual Channel, 2Gbit/s PCI-
X 133MHz, 3.3V signaling; max. 1x per server blade
PCI options
– One PCI slot is available instead of the lower hard disk drive
slot.
– The PCI slot is a half-length, full-height slot. The slot
provides PCI-X 64bit/100MHz.
i
With this solution only one internal SCSI hard disk
module per server blade is possible.
March 2006
Product designations
02 BX600
–
17
–