The Server Blade
Ê Disconnect the termination board from the connector for the PCI bridge
module by undoing the two screws and lifting the board out in an upward
direction.
!
Keep the termination board in a safe place. If the PCI expansion module
has to be removed again, the termination board must be reconnected to
the socket of the IMB interface.
Ê Connect the PCI riser card to the blade server main board. Insert the bridge
module and fix it with two screws.
02
BX600
94
–
–
Removal and Installation Routines
March 2006
U41057-J21-Z146-1-76