Fujitsu PRIMERGY BX600 User Manual page 122

The Management Blade Removal and Installation Routines
Ê Remove the management blade.
Ê Set jumper from position 1 - 2 to position 13 - 14.
Ê Reinstall the management blade.
The default settings are rebuilt.
Rebuilding without HyperTerminal
Ê Remove the management blade, see
page 02-BX600-115.
Ê Set jumper from position 13 - 14 (normal mode) to position 1 - 2 (load default
settings).
Ê Reinstall the management blade.
Ê Wait for about 1 minute.
Ê Remove the management blade.
Ê Set jumper from position 1 - 2 to position 13 - 14.
Ê Reinstall the management blade.
The default settings are rebuilt.
02 BX600 122 March 2006
– – U41057-J21-Z146-1-76