Fujitsu PRIMERGY BX600 User Manual page 16

Product designations
Product
S26361-F2549-E301 Xeon 2.80 GHz, 512 KB SLC, heat sink
S26361-F2549-E302 Xeon 3.06 GHz, 512 KB SLC, 1MB TLC, heat sink
S26361-F2549-E303 Xeon 3.2 GHz, 512 KB SLC, 1MB TLC, heat sink
Product
S26113-F479-E50
Product
S26361-F2762-E523 Main memory 512 MB, PC2100-registered DDR RAM with
S26361-F2762-E524 Main memory 1 GB, PC2100-registered DDR RAM with chipkill
S26361-F2762-E525 Main memory 2 GB, PC2100-registered DDR RAM with chipkill
S26361-F2762-E526 Main memory 4 GB, PC2100-registered DDR RAM with chipkill
02 BX600 16
– –
Processors
There are two processor slots available. One slot is occupied by
the basic unit. These can be populated with Intel Xeon (DP)
processors. It is possible to upgrade the second processor later
on. Two processors with different clock frequencies are not
possible. A multiprocessor operating system is required for a
dual-processor system.
Conversions
Power supply unit, 1200 W (at 220 V) or 850 W (at 110
power cord for rack, 4m length
PSU dummy module
Main memory
A server blade offers 2 memory expansion slots.
–
– These accept 512MB, 1GB, 2GB and 4GB DDR SDRAM
memory.
– The maximum main memory capacity is 12 GB
i
ECC with memory scrubbing function, chipkill and
hot-spare memory bank support is standard on the
PRIMERGY BX600 server blades.
chipkill support, consisting of 2 modules, occupies one bank,
max. 3 per server blade
support, consisting of 2 modules, occupies one bank, max. 3 per
server blade
support, consisting of 2 modules, occupies one bank, max. 3 per
server blade
support, consisting of 2 modules, occupies one bank, max. 3 per
server blade
March 2006
General information
V), incl.
U41057-J21-Z146-1-76