Opening A 4-Way Server Blade - Fujitsu PRIMERGY BX600 User Manual

Updates

Opening a 4-way server blade

If hard disk modules are installed in the 4-way server blade, these must be
!
removed before opening the server blade (see
The 4-way server blade is extremely sensitive to electrostatic discharge
and must therefore be handled with caution. Place the server blade on
an insulated, antistatic surface before taking off its cover. Never slide a
server blade over a surface.
Ê Unlock the server blade cover by pressing on the touchpoints (1) and slide
back the cover as far as possible (approx. 1.5 cm) in the direction of the
arrow (2).
Ê Fold the cover to the left into the vertical locking position (3).
Do not fold the cover further up than the vertical locking position, as
!
this may damage the mechanical elements of the server blade
chassis.
U41057-J21-Z146-1-76
3
1
March 2006
Update revision 08.2004
page 02-BX600-77).
2
1
02 BX600
–
175
–