ZH
7. Install the rear disc brake dust shield by installing
the bolts (1) to the rear hub assembly. Tighten the
bolts to 10 N·m (89 in. lbs.).
8. Install the rear axle halfshaft to the rear hub
assembly.
Note: A new halfshaft outer retaining nut must be
used.
9. Install the rear axle halfshaft outer retaining nut (1).
Tighten the halfshaft nut to 220 N·m (164 ft. lbs.).
10. Install the rear Wheel Speed Sensor (2). (Refer to
5
-
BRAKES/ELECTRICAL/REAR
SPEED SENSOR - INSTALLATION).
WHEEL
REAR SUSPENSION 2 - 61