Chrysler 2005 Crossfire SRT6 Service Manual page 95

ZH
12. Remove the two bolts (1) attaching the rear axle
carrier to the front portion of the frame.
13. Remove the two bolts (2) attaching the rear axle
carrier to the rear portion of the frame.
14. Lower the rear differential housing down approxi-
mately 4 - 5 inches allowing enough room for the
stabilizer bar to be removed from the vehicle.
15. Remove the rear stabilizer bar clamps (3) by
removing the nuts (1) from the studs and then
removing the stabilizer bar (2).
16. Remove the rear stabilizer bar from the vehicle by
maneuvering it over the axle carrier and away
from the vehicle.
REAR SUSPENSION 2 - 71