Installation - Chrysler 2005 Crossfire SRT6 Service Manual

3 - 8 HALFSHAFTS
9. Slide the C/V boot off of the axle halfshaft.
10. Thoroughly clean and inspect the inner C/V joint
assembly for any signs of excessive wear. (Refer
to 3 - DIFFERENTIAL & DRIVELINE/HALF
SHAFT/CV JOINT - INSPECTION)

INSTALLATION

1. Clean and inspect the C/V joint for wear and pit-
ting. Replace as required. (Refer to 3 - DIFFEREN-
TIAL & DRIVELINE/HALF SHAFT/C/V JOINT -
INSPECTION).
2. Remove any road grime and debris from the axle
shaft splines.
3. Before installing the C/V boot, cover the shaft
splines to protect the C/V boot during installation.
4. Slide the new C/V boot onto the axle halfshaft.
ZH