ZH
5. Brace the rear suspension lower control arm with a
suitable lifting device.
6. Raise the control arm until the halfshaft is horizon-
tal.
7. Using Special Tool 9152 Compressor Plates and
9150 Spring Compressor (1) compress the rear
spring.
8. Remove the rear bolts on the lower control arm (4)
attaching the control arm to the frame.
9. Remove the lifting device.
10. Swing the lower control arm (2) down away from
the mounting flange (1).
11. Carefully remove the spring from the vehicle.
REAR SUSPENSION 2 - 79