Paper Empty Detection - Minolta Di 620 Manual

1155SBM1202A

12-2. Paper Empty Detection

(1) Metric Areas
A paper empty detection in the 1st and 2nd Drawers is detected by 1st Drawer
Paper Empty Sensor and 2nd Drawer Paper Empty Sensor, respectively.
(2) Inch Areas
A paper empty detection in the 1st and 2nd Drawers is detected by 1st Drawer
Paper Empty Sensor and 2nd Drawer Paper Empty Sensor, and 1st Drawer
Paper Empty Key and 2nd Drawer Paper Empty Key, respectively.
1st/2nd Drawer Paper Empty Sensor detects a paper-empty condition at the time
of the paper take-up. The copier considers that there is no paper loaded if the
sensor is unblocked (
1st/2nd Drawer Paper Empty Key detects a paper-empty condition when the
drawer is slid into the copier. The copier considers that there is no paper loaded
if the board is unblocked (
1st/2nd Drawer Paper Empty Key
(PWB-E1/E2)
PC48/49 (blocked)
PC48/49 (unblocked)
).
H
).
H
Paper Present
The paper stack raises the Paper Empty Lever
which blocks (
1075M121CA
Paper not Present
The Paper Empty Lever drops into the cutout in
the Paper Lifting Plate and the light blocking plate
of the empty lever clears PC48/49 (
1075M122CA
M-67
Paper Lifting Plate
Paper Empty Lever
1st/2nd Drawer Paper
Empty Sensor (PC48/49)
1075M108AA
) PC48/49.
L
).
H