Precautions For Use - Minolta Di 620 Manual

1155SBG0400A
4

PRECAUTIONS FOR USE

To ensure that the copier is used in an optimum condition, observe the following
precautions.
Never place a heavy object on the copier or subject the copier to shocks.
Insert the power plug all the way into the outlet.
Do not attempt to remove any panel or cover which is secured while the copier is
making copies.
Do not turn OFF the Power Switch while the copier is making copies.
Provide good ventilation when making a large number of copies continuously.
Never use flammable sprays near the copier.
If the copier becomes inordinately hot or produces abnormal noise, turn it OFF
and unplug it.
Do not turn ON the Power Switch at the same time when you plug the power cord
into the outlet.
When unplugging the power cord, do not pull on the cord; hold the plug and pull
it out.
Do not bring any magnetized object near the copier.
Do not place a vase or vessel containing water on the copier.
Be sure to turn OFF the Power Switch at the end of the workday or upon power
failure.
Use care not to drop paper clips, staples, or other small pieces of metal into the
copier.
Operating Environment
The operating environmental requirements of the copier are as follows.
•
Temperature: 10°C to 32°C with a fluctuation of 10°C per hour
•
Humidity: 15% to 85% RH with a fluctuation of 10% RH per hour
Power Requirements
The power source voltage requirements are as follows.
•
Voltage Fluctuation:
•
Frequency Fluctuation:
AC115/120/127/220-240V
±10% (Copying performance assured)
+6%, –10% (AC127V Areas only)
–15% (Paper feeding performance assured)
50/60 Hz ±0.3%
G-11