2) Inch Areas
When the drawer is slid into the copier and, if 1st/2nd Drawer Paper Empty Sen-
sor and 1st/2nd Drawer Paper Empty Key are blocked (
operations will energize 1st/2nd Drawer Lift-Up Motor to turn forward, thus rais-
ing the paper stack.
Press 1st/2nd Drawer Paper Descent Key
UN7/8.
Turn ON Power Switch S1.
Open and close a door.
Raise and lower the Duplexing Document
Feeder.
Paper Lifting Arm
Paper Stack Lifting
See 1) Metric Areas operation.
1st/2nd Drawer Lift-Up Motor
(M24, M25)
&
During Copy Cycle
M-71
L
Load originals on the Duplexing Document
Feeder.
Place a paper stack on the Multi Bypass Table.
Slide the Sorter away from, and back to, the
copier.
Press any key on the control panel.
), any of the following
1075M123CA