Removal Of The Scanner Drive Cables - Minolta Di 620 Manual

Hide thumbs Also See for Di 620:

Table of Contents

13) Removal of the Scanner Drive Cables

1. Remove the Rear Cover.

2. Remove the IR Section Cooling Fan Filter.

3. Using a brush or a vacuum cleaner, clean the Cooling Fan

1. Remove the Electronic Document Hander, Rear Cover,

Upper Rear Cover, Right Upper Cover, Upper Right Cover,

Left Upper Cover, Upper Left Cover, and Original Glass.

2. Remove the Scanner.

3. Move the Scanner to the location shown. Then, remove the

Scanner positioning screws, one each at the front and rear,

and free the Scanner fixing bracket.

4. Slide out the IR Unit.

5. Unplug one connector, unhook the spring, and remove four

screws and the Scanner Motor.

6. Remove two screws to free the SCP Board.

7. Remove three screws and the drive support plate.

Table of Contents