Table of Contents
Advertisement
9. Use the 10-key Pad to change the setting value.
Setting Instructions
If the scale image on the copy is on the + end with respect to the Original Width Scale, make the
setting value smaller than the current one.
If the scale image on the copy is on the - end with respect to the Original Width Scale, make the
setting value greater than the current one.
• If a single adjustment procedure does not successfully bring the leading edge image position into
the specified range, try another setting value.
10. Touch the [Enter] key to validate the setting value.
Caution
Be sure to touch the Enter key before returning to the normal operation mode. If the Panel Reset Key
is used, the previous setting remains valid.
4
7
1155D200CA
D-109
3
5
6
8
9
0
C
Use to clear the setting value.
Use to enter the setting value.
Use to chage the + or - sign.
1155D189CA
1155D189CA
Advertisement
Chapters
Table of Contents
