Table of Contents
Advertisement
5. Use the 10-key Pad to change the setting value.
Setting Instructions
1) If the scale on the copy is longer than the actual scale, decrease the setting value.
2) If the scale on the copy is shorter than the actual scale, increase the setting value.
* If the measurement does not fall within the specifications through one setting, try another setting.
6. Touch the [Enter] key to validate the setting.
NOTE
Be aware that the previous data is restored if the Panel Reset Key is pressed to return the copier to
the normal operating state. Be sure to touch [Enter] and then [Exit] to resume the normal operating
state.
4
7
1155D194CA
D-105
3
5
6
8
9
0
C
Use to clear the setting value.
Use to enter the setting value.
1155D190CA
1155D190CA
Advertisement
Chapters
Table of Contents
