Removal Of The Sub Hopper - Minolta Di 620 Manual

2-7. DEVELOPING UNIT

1) Removal of the Sub Hopper

2) Disassembly of the Developing Unit and Replacement of Parts
1. Remove the Developing Unit.
2. Remove two screws and the Sub Hopper.
1075D217AA
1. Remove the Sub Hopper.
2. Loosen two screws and the Developer Scattering
Prevention Plate.
3. Remove the guide.
1075D218AA
When reinstalling the Developer Scattering Prevention
Plate, press it against the Developing Unit.
1075D219AA
4. Remove two screws and the handle.
5. Remove the Doctor Blade.
1075D220AA
NOTE
D-51